What are you looking for?
Once you have chosen the right blind, it is time to install it and maintain it after some time of use. There may come a time when the fabric strips do not line up perfectly. Find out how to adjust your roller blinds.
You should have received detailed instructions on how to install your night blinds from the manufacturer. It will vary with the type of product you have decided on. You will also receive all the necessary components for fixing in the kit. However, you will often need to fit the dowels yourself, as the number of dowels depends on the width of the roller blind and also the type of wall in the room.
You will need special mounting tape and scissors for the no-drill installation of the day-night blind. Do not forget to degrease the area where the entire mechanism will be attached. Then it will stick better. The cassette should be attached so that the mounting point is on a flat surface and the fabric roll is at the height of the glass. It is best to stick the foam tape directly to the plastic guides.
For invasive installation, choose a suitable location - you can choose either the ceiling or the wall. For cassette roller blinds, the bracket can be screwed to the window frame. For this type of fixing, you will need a drill, spirit level, screws, and wall plugs. You will need to measure and mark the location of the holes on the wall, install the clips with the screws, and then insert the entire mechanism.
During installation, you also need to remember to put a chain mechanism on the end of the winding tube and a cap on the other side.
Adjustment of the day-night blinds during fitting must be based on an even position of the entire mechanism. Otherwise, the material will move and fall down during use. The guides along which the roller blind is guided should also be installed evenly. Furthermore, high-quality accessories should be selected, which allow precise and stable mounting.
Recall that the performance of this type of product is very important. The darker parts of the fabric must coincide perfectly, so it may be necessary to adjust the day-night blinds even after several months.
Roleta dzień noc jest bardzo specyficzna, ponieważ wyróżnia się wykonaniem z dwóch różnych materiałów. Wszystko po to, aby dowolnie regulować stopień zaciemnienia pomieszczenia. To domownik decyduje, ile promieni słonecznych przepuszcza do wewnątrz. Materiały wzajemnie się na siebie nakładają, dlatego już podczas montażu trzeba zwrócić na to uwagę. Jeśli pasy nie nachodzą na siebie w dokładny sposób, będzie to także wyglądać nieestetycznie.
If, after a while, you have noticed that the individual strips do not overlap evenly, it is necessary to adjust the roller blinds day and night. This is actually not very complicated. Simply remove the side covers and then use the adjustment knob to align the individual pieces of fabric perfectly. It is best to pay attention to the darker strips so that they overlap each other. The light material should also be parallel to the dark material. Then you can be sure that the adjustment of the roller blinds will translate into their pleasant use as well as their functionality. Take a closer look at the performance of your window guards and carry out a review of the material once every six months. This will ensure an aesthetically pleasing appearance of the room, as well as proper operation of the roller blind.
Wondering when an adjustment of day/night blinds is needed? This can be caused by tugging the fabric too hard or by mechanical damage. In such cases, it is worthwhile to arrange the fabric in such a way that the individual strips align well with each other. The problem may also lie in the installation itself, so you should check whether the blind is installed perfectly horizontally. If this is not the case, it may be helpful to place a piece of paper or cardboard under the brackets (if it is a non-invasive installation).
Pay attention to whether the roller blind is blocking the cassette. This can also be the cause of poorly aligned fabric. In this case, simply remove the side covers, unscrew the cassette with the rod, correct it, and then fix the mechanism.
It may also happen that the adjustment of the day-night blinds is not possible because the fault lies in the manufacture of the product. A manufacturing defect can result in the fabric strips not aligning perfectly. This is why you should choose a manufacturer that guarantees the high quality of the roller blind and that you can fit it to size, adapting it to your room.
Also, check out other articles on day-night blinds:
How do I clean my day and night blinds?
Day and Night blinds - what is worth knowing about them?
How do I repair a night blind?